Brand

Rockwood Repair and Collision Work for Placentia

Rockwood pop up campers, travel trailers and fifth wheels. We repair them in our 35,000 square foot facility about ten minutes from Placentia, which matters on a platform like this because the right method depends entirely on how the unit is put together rather than on a generic body procedure.

How is a Rockwood built, and why does that change the repair?

Construction dictates method. A shop that treats every vehicle as sheet metal over a frame will get this platform wrong, because the load paths and the materials are not the same as a passenger car.

Pop up models with lift systems, canvas and folding hardware that require mechanical repair as much as body repair.

Hard side and ultra lite trailers with laminated construction and comparatively thin skins.

What do we see fail on a Rockwood?

These are the failures that actually come through the door on this brand, not a generic list. Most of them progress quietly, which is why an early inspection is worth far more than it costs.

Lift cable fraying at the sheave and canvas mildew or tearing at the fold lines on pop up models.

Roof and corner sealant failure on hard side units, with debonding around any fastener penetration.

An in-shop inspection and written evaluation runs $150 for RV systems, applied as a credit against an authorized repair. Where the fault is electrical or intermittent, an in depth diagnostic is one hour at $285, also applied as a credit.

What is included

Written evaluation with photographs before any work is authorized
Structural measurement where the frame or chassis is involved
Colour matched paint blended into adjacent panels, not spot sprayed
Insurance estimate and supplement documentation handled for you
Parts sourced to the model year, or fabricated where they are discontinued
Work performed in-shop, where the lift capacity and booth are

Questions we get asked

Do you work on Rockwood?

Yes. Rockwood pop up campers, travel trailers and fifth wheels, and we repair them regularly. Because pop up models with lift systems, canvas and folding hardware that require mechanical repair as much as body repair. the repair method is dictated by how the unit is built rather than by a generic body shop procedure, which is the main reason these come to a specialist rather than a general collision shop.

What fails most often on a Rockwood?

The pattern we see most is this: lift cable fraying at the sheave and canvas mildew or tearing at the fold lines on pop up models. Catching it early is almost always the difference between a contained repair and a structural one, because water and fatigue damage both spread quietly before they become visible.

Can you match the paint on a Rockwood?

Yes. We match and blend on site in our booth, including multi stage and metallic finishes. On a large vehicle a spot repair rarely looks right, so we blend into the adjacent panels. Body and paint labor is billed at $210 an hour with paint supplies calculated at $55 an hour against paint hours.

Will my insurance cover a Rockwood repair here?

We bill direct with every major carrier and handle the estimate, the teardown documentation and the supplement conversation. You choose the shop in California, not the carrier. We will show you where a carrier negotiated rate differs from our posted retail rate before any work is authorized.

We Can Help! Contact Us Today.

Bring it to the shop and we will assess the damage, document it properly for your insurer, and tell you exactly what the repair involves. Serving Placentia and the surrounding area from our 35,000 square foot facility.

Request a Quote Call (949) 799-3387

All work performed in-shop. We stand behind our work.