Vehicles

Mobile Business Vehicle Repair Serving Placentia, CA

A business built on wheels stops earning the day the body is damaged. OCRV Center repairs food trucks, clinic coaches, grooming vans, tool bodies, espresso trailers and command vehicles at our 35,000 sq ft Yorba Linda facility, about ten minutes from Placentia by Imperial Highway or the 91. You bring the vehicle to us, we schedule the bay, document the damage and work direct with your carrier.

What makes a business vehicle different from an ordinary van or truck?

A vending or service vehicle is a building that drives. The chassis is only half the problem. The other half is the build inside it: plumbing, propane, high-draw electrical, millwork, tanks and equipment that all bear on the body structure and all have to survive the repair.

A collision to a food truck is never just a panel. The impact loads travel through the sub-floor into the equipment anchors, which is why we open up the affected zone and look at the hood curb, the propane locker mounts and the generator tray before we quote a skin. Repairing the sheet metal and ignoring the anchor cracks means the truck comes back.

These vehicles also carry regulatory weight. A county health department signed off on a particular layout, a particular sink count, a particular hood clearance. Repair work that quietly relocates a wall or narrows a clearance can invalidate that approval, so we photograph the original layout, restore it exactly and note any change in writing before we touch it.

Placentia operators run a wide mix: kitchens, clinic coaches, grooming vans, tool bodies and espresso trailers. What they share is that every day in the bay is a day of lost revenue, which is why scheduling and a documented turnaround matter more here than on a personal vehicle.

How do you keep downtime short on a revenue vehicle?

The fastest repair is the one that does not stall waiting on parts or on a carrier approval. We front-load both. Parts get ordered off the teardown, not off the walk-around, and the supplement goes to the adjuster with photos attached the same week.

We book vending and service vehicles into a scheduled slot rather than a queue. You get a target date at authorization and a call if anything moves it. That matters because a food truck sitting in a body shop is a closed business, not an inconvenience, and a two-week open-ended repair can cost more than the collision did.

Long-lead items get identified during teardown: serving window glass, stainless panels cut to size, a replacement generator tray, a lift actuator. Where a component has a long lead we will tell you whether an interim repair can put you back on the route while the part travels, and what that interim repair costs.

Documentation is the other lever. Photo estimates, teardown findings and supplement requests go to the carrier in one package so the adjuster is not asking for a second round of pictures a week later. Working direct with Progressive, GEICO, State Farm, AAA SoCal, Mercury, Allstate and the rest of the major carriers is a large part of why our turnaround holds.

Why does all of this work happen at the Yorba Linda shop?

Because the equipment does not travel. Full-height bays, a paint booth sized for box bodies and coaches, frame and chassis equipment, welding, and a clean space for pulling and reinstalling sensitive interior equipment all live under one roof at 23281 La Palma Ave.

Structural, body, paint, glass, roof, sidewall, electrical, plumbing, appliance, chassis and interior work all happen in the same building, so a food truck with a bent step, a cracked skirt, a leaking hood penetration and a torn wrap is one intake and one repair plan instead of four vendors and four schedules.

Color matching is done in-house, including multi-stage and gel coat blending. For a vending vehicle the paint and wrap are the storefront, so we match, blend into adjacent panels and reinstall graphics so the finished side does not read as repaired.

Drop-off and pickup are at the Yorba Linda facility. Placentia owners are about ten minutes out, and we are open Monday to Friday 8:00 AM to 5:00 PM and Saturday 9:30 AM to 3:00 PM. Call (949) 799-3387 to Request a Quote and get a slot on the calendar.

What is included

  • Documented photo damage assessment with teardown findings
  • Direct billing and supplement handling with major carriers
  • Structural and sub-floor repair on box, coach and van bodies
  • Stainless, aluminum and fiberglass panel repair and replacement
  • Paint, multi-stage color matching and gel coat blending
  • Wrap and graphics removal, reinstallation and restoration
  • Propane, water, tank and plumbing line repair after body damage
  • Generator, inverter and shore power electrical work
  • Serving window, door, ramp, lift and step repair
  • Interior millwork, cabinetry and equipment reinstallation

How the work runs, step by step

  1. 1

    Intake and walk-around at the shop

    You bring the vehicle to Yorba Linda, we photograph every panel, the interior build and the equipment anchors before anything is disturbed.

    Same day, about an hour

  2. 2

    Teardown and hidden damage findings

    We open the damaged zone to find cracked anchors, split lines, wet sub-floor and structure damage that never shows on a walk-around.

    1 to 3 shop days

  3. 3

    Estimate and carrier submission

    The photo estimate and any supplement go direct to your adjuster in one package, with parts ordered off the teardown findings.

    Usually within 48 hours of teardown

  4. 4

    Structural, body and equipment repair

    Structure and body come first, then plumbing, propane, electrical and interior millwork get restored to the approved original layout.

    3 to 15 shop days depending on scope

  5. 5

    Paint, wrap and graphics restoration

    Panels are refinished with blended color, then wrap and lettering are reinstalled so the working side matches the untouched side.

    2 to 6 shop days

  6. 6

    Function check and pickup

    We pressure and leak check what we opened, verify power and equipment operation, then walk the finished vehicle with you at pickup.

    Pickup at the Yorba Linda facility

Mobile Business Vehicles we repair

Questions we get asked

Do you come out to the food truck, or does it have to come to you?
The vehicle comes to us. All work is performed in-shop at 23281 La Palma Ave in Yorba Linda, about ten minutes from Placentia, because the full-height bays, paint booth, frame equipment and welding gear are what actually make a correct repair possible. Drop-off and pickup both happen at the facility.
How long will my vending vehicle be out of service?
It depends on scope, but we schedule a slot and give you a target date at authorization rather than putting you in an open queue. Minor panel and paint work often runs a few shop days. A collision with structural and interior involvement can run two to four weeks. Long-lead parts are flagged at teardown so you are not surprised in week three.
Will repair work put my health department approval at risk?
Not if it is done deliberately. We photograph the approved interior layout before teardown, restore sink placement, hood clearance, wall finishes and NSF surfaces exactly as they were, and put any unavoidable change in writing so you can take it to the county before it becomes a re-inspection problem at your next permit renewal.
Do you bill my insurance carrier directly?
Yes. We work direct with Progressive, GEICO, State Farm, AAA SoCal, Mercury, Allstate, American Family, Wawanesa, National General, Foremost, Liberty Mutual and others. We submit documented photo estimates and handle supplements with the adjuster, which keeps approvals from becoming the reason your truck sits in the bay.
What does an estimate cost?
An RV and coach systems estimate is $150, applied as a credit toward the repair. A one hour diagnostic is $285, also applied as a credit toward the repair. Labor runs $210 per hour for body and paint, $260 per hour for mechanical and electrical. Call (949) 799-3387 to Request a Quote and schedule an intake.

We Can Help! Contact Us Today.

Bring it to the shop and we will assess the damage, document it properly for your insurer, and tell you exactly what the repair involves. Serving Placentia and the surrounding area from our 35,000 square foot facility.

All work performed in-shop. We stand behind our work.